GND is the GND of the 2.5mm jack plug, the PC->radio line is the GND of the 3.5mm jack plug’s GND (which is also PTT), the radio->PC line is the middle of the 2.5mm jack plug. 9600bd, max232 needed.
I have a kg-uv6d wouxun ht. Can you kindly guide me on the schematic wiring to my URI-DMK fob USB interface. Its going to be from my programing cable ( wouxun) hack into DB25 pin uri . My purpose is to use this as my mobile radio node portable VOip over my aircard 3G via allstarlink.
Any advice on the pin out including squelch would be appreciated.
I have wouxun kg-uv8d.Can you tell me who pins are line in and line out;
His cable pinout is:
1–Mic,rx data,ptt +
2–mic+
3–V+
4–speaker +
5–tx data
and
6–speaker -,ptt,gnd
I'm Nonoo. This is my blog about music, sounds, filmmaking, amateur radio, computers, programming, electronics and other things I'm obsessed with.
... »
Projects
About wouxun wiring, do you know any schematics for programming cable and what is the data wiring into the 2 audio sockets?
Thanks a lot!
Andy Iw0eac
GND is the GND of the 2.5mm jack plug, the PC->radio line is the GND of the 3.5mm jack plug’s GND (which is also PTT), the radio->PC line is the middle of the 2.5mm jack plug. 9600bd, max232 needed.
Hello nonoo,
I have a kg-uv6d wouxun ht. Can you kindly guide me on the schematic wiring to my URI-DMK fob USB interface. Its going to be from my programing cable ( wouxun) hack into DB25 pin uri . My purpose is to use this as my mobile radio node portable VOip over my aircard 3G via allstarlink.
Any advice on the pin out including squelch would be appreciated.
Thank you Sir.
7 3
Moises,
did you get an answer to your question? I am trying to do the same thing.
Tom VE3NY
Just as a side comment, since I can never keep these schematics straight, these should be read as:
2.5mm Phone:
Sleeve: GND
Ring: Empty
Tip: Audio Out
3.5mm Mic:
Sleeve: PTT
Ring: Mic In
Tip: Empty
Amir
Wouxun KG-689 wiring at dreamport | nonoo.hu
I have wouxun kg-uv8d.Can you tell me who pins are line in and line out;
His cable pinout is:
1–Mic,rx data,ptt +
2–mic+
3–V+
4–speaker +
5–tx data
and
6–speaker -,ptt,gnd
You can see it here:
http://www.miklor.com/COM/UV_Technical.php
Can you help me where i connect line in,line out;
Thank you.